What the RAM Track Ball Base Includes
The RAP-B-304U-TRA1 (RAM Track Ball Base with Drill-Down Receiver) consists of a drill-down receiver base that can hard mount to any flat surface, plus a 1" Track Ball that slides and tightens into the receiver. This combination creates an incredibly low-profile track mounting platform where a double ball mount can quickly disconnect when not in use.
Installation Steps
Follow these steps to install the base on a flat surface. Note that the supplied information does not include specific drilling dimensions or torque values, so use standard hardware and care for your surface material.
- Choose a mounting location: Select a flat, solid surface that can support the mount and your device. The base is designed to hard mount to any flat surface, such as a dashboard, desk, or panel.
- Drill the mounting holes: Use the drill-down receiver base as a template to mark hole positions. Drill pilot holes according to your surface material (e.g., metal, plastic, or wood). The supplied information does not specify hole size or spacing, so measure the base's mounting holes directly.
- Secure the receiver base: Attach the receiver base to the surface using appropriate screws and tools (not included). Tighten securely but avoid over-torquing, especially on thin or brittle surfaces.
- Insert the Track Ball: Slide the 1" Track Ball into the receiver slot and tighten the mechanism until the ball is held firmly. The ball can be repositioned by loosening, sliding, and re-tightening.
- Attach your device mount: Connect a double ball mount or other RAM component to the Track Ball. The low-profile platform allows the mount to disconnect quickly when not in use.
Product Facts for the RAM Track Ball Base
- RAM® Track Ball™ Base with Drill-Down Receiver: The RAP-B-304U-TRA1 consists of a drill-down receiver base that can hard mount to any flat surface, with a 1" Track Ball that can slide and tighten into the receiver. This confirms the base is a permanent hard-mount solution, not a clamp or adhesive mount. The sliding Track Ball allows horizontal adjustment before locking.

RAM® Track Ball™ Base with Drill-Down Receiver - RAM® Track Ball™ Base with Drill-Down Receiver: Create an incredibly low-profile track mounting platform where the double ball mount can quickly disconnect when not in use. The low profile is useful for tight spaces, and the quick-disconnect feature lets you remove the mount arm and device easily, leaving only the thin base on the surface.
- RAM® Track Ball™ Base with Drill-Down Receiver: Ideal for mounting small handheld electronics such as phones, cameras or small tablets. This mount is sized for lightweight devices. Heavy laptops or large tablets may not be suitable—check your device weight and the RAM arm's capacity separately.
What the Supplied Information Does Not Cover
The catalog does not specify the exact hole pattern, screw size, or torque for drilling. You will need to measure the base's mounting holes and choose appropriate hardware for your surface. Also, while the Track Ball is 1" in diameter, the catalog does not state the maximum load capacity for the base alone—ensure your device and arm combination does not exceed reasonable limits for a single-ball connection.


