Back to Blog
How-to Guides 2026-11-20 RAM Mounts Google Search 0 views

RAM Finger-Grip Radio Mount with Yoke Clamp Installation

RAM Finger-Grip Radio Mount with Yoke Clamp Installation

Step-by-step guide to installing the RAM Finger-Grip universal holder with yoke clamp base for two-way radios and other devices.

What This Mount Solves

If you need a secure, adjustable way to mount a two-way radio, GPS, or other handheld device on a vehicle yoke (the U-shaped bar found on tractors, forklifts, or ATVs), the RAM Finger-Grip Universal Holder with Yoke Clamp Base is a practical all-in-one solution. This guide covers what comes in the kit and how to set it up.

Kit Contents and Key Facts

  • RAM® Finger-Grip™ Universal Holder with Yoke Clamp Base: The RAM® Finger-Grip™ is a universal holder that can accommodate a wide range of devices including GPS, handheld radios, phones, bluetooth speakers, and much more. Included with the holder are three sets of four flexible rubber-coated fingers to grip your device. The three finger-grip sets let you adjust the holder to fit different device widths and shapes, making it a versatile choice for multiple tools.
    RAM® Finger-Grip™ Universal Holder with Yoke Clamp Base
    RAM® Finger-Grip™ Universal Holder with Yoke Clamp Base
  • RAM® Finger-Grip™ Universal Holder with Yoke Clamp Base: This sku also includes a medium length B size arm as well as a yoke clamp base for yokes between .625" and 1.25" in diameter. The yoke clamp base attaches directly to round or square tubing within that range, and the medium arm gives you positioning flexibility.
  • RAM® Finger-Grip™ Universal Holder with Yoke Clamp Base: The main backing plate consists of multiple slotted holes where any set of finger grips can be positioned to hold your device firmly. When positioned correctly, your device can easily wedge in and out of the holder; suited for any rough environment. The adjustable finger positions let you customize the grip for your device's exact size, while still allowing quick removal when needed.

Installation Steps

The following steps are based on the supplied product information. No specific torque, angle, or tool requirements are provided, so use standard hand tools and common sense.

  1. Attach the yoke clamp base to the yoke: Open the yoke clamp and position it around the yoke (bar) where you want the mount. The clamp fits yokes between 0.625" and 1.25" in diameter. Tighten the clamp screws until the base is secure and will not rotate.
  2. Connect the medium B size arm: Attach the medium length B size arm to the ball on the yoke clamp base. The RAM ball-and-socket system allows you to angle the arm as needed. Tighten the knob hand-tight.
  3. Attach the Finger-Grip backing plate to the arm: The other end of the arm has a socket that connects to the ball on the back of the Finger-Grip plate. Press the plate onto the ball and tighten the knob.
  4. Choose and position the finger grips: Select one of the three sets of four flexible rubber-coated fingers. Insert each finger into the slotted holes on the backing plate so that they match the width and depth of your device. The fingers should hold the device snugly but allow it to be wedged in and out.
  5. Add optional top and bottom supports: If you need extra stability (for rough terrain or heavier devices), install the two sets of optional top and bottom supports onto the backing plate. These provide additional contact points.
  6. Test the device fit: Press your device into the finger grips. It should fit firmly without excessive force. Adjust finger positions if the device wobbles or is too tight. Ensure the device can be removed easily when needed.

Checkpoints Before Finalizing

Before you rely on the mount in the field, verify that the yoke clamp is tight on the bar and that the arm knobs are hand-tight. The supplied information does not specify a torque value, so check for any movement after a short test ride or operation. Also confirm that the device does not interfere with controls or visibility.

If your device is unusually thick or has a non-rectangular shape, you may need to experiment with different finger positions or use the optional supports. The kit includes three finger sets, so you have room to adjust.

What the Supplied Information Does Not Settle

The product record does not specify the exact weight limit for the Finger-Grip holder or the maximum device thickness it can accommodate. For heavy or large radios, test the grip strength before permanent use. No instructions are provided for removing or replacing the finger grips after initial setup, but they are designed to be repositioned. The yoke clamp's grip on painted or coated yokes is also not detailed; use caution on delicate surfaces.

Related Articles

Customer Service
Home
Products
Cart
Profile