What the RAM EZ-Strap Rail Mount Includes
The RAM EZ-Strap Rail Mount (part number RAP-SB-187-LO3) is a complete kit designed to attach compatible GPS devices like the Lowrance AirMap 600C and iFinder to a rail or handlebar. It uses the RAM Snap-Link 3/4" connection, which is rated to hold up to 1 lb, and fits rail diameters from .5" to 2.58".
Key Product Facts
- RAM® EZ-Strap™ Rail Mount for Lowrance AirMap 600C, iFinder + More: The RAM EZ-Strap Rail Mount fits rail diameters from .5" to 2.58" and uses the Snap-Link 3/4" connection rated to hold up to 1 lb. This tells you which rails it works on and the maximum weight it can support, so you can check compatibility before installation.

RAM® EZ-Strap™ Rail Mount for Lowrance AirMap 600C, iFinder + More - RAM® EZ-Strap™ Rail Mount for Lowrance AirMap 600C, iFinder + More: The mount is listed for Lowrance AirMap 600C, iFinder, and more. If you own one of these devices, the mount is designed to work with it out of the box.
Installation Steps
Follow these steps to install the RAM EZ-Strap Rail Mount on your rail or handlebar.
- Step 1: Position the mount on the rail: Place the EZ-Strap around the rail at your desired location, ensuring the rail diameter is between .5" and 2.58".
- Step 2: Secure the EZ-Strap: Tighten the strap evenly until the mount is firmly attached. Do not overtighten, as the strap is designed to hold securely without damaging the rail.
- Step 3: Attach your device using the Snap-Link 3/4" connection: The Snap-Link connection holds up to 1 lb. Ensure your device (e.g., Lowrance AirMap 600C) is within this weight limit. Connect the device's mounting plate to the Snap-Link until it clicks into place.
- Step 4: Adjust the viewing angle: Once attached, rotate the device to your preferred viewing angle. The Snap-Link allows for easy repositioning.
Checkpoints Before You Finish
Before you consider the installation complete, verify that the mount is tight and the device is securely attached. The supplied information does not include specific torque values or safety checks, so use common sense: give the mount a gentle tug to ensure it won't shift during use. Also confirm that the total weight of your device and any attached accessories does not exceed 1 lb.
What the Supplied Information Does Not Cover
The available product record does not include detailed installation instructions, care steps, or compatibility with every possible device. If you own a device not listed (e.g., AirMap 600C or iFinder), you may need to verify its mounting plate compatibility with the Snap-Link 3/4" connection. The mount is built for rails, not flat surfaces, so using it elsewhere is not supported by the supplied facts.


