What This Mount Offers
The RAM Small Gas Tank Mount with Universal Action Camera Adapter gives you a low-profile way to capture a unique perspective from your motorcycle. The powder-coated aluminum base mounts directly to the stock gas tank of compatible motorcycles, and the included adapter works with GoPro and Garmin-style action cameras.
This guide covers what you get in the kit and the steps to mount it securely. Since the mount uses the gas tank fill port, installation is straightforward and doesn’t require drilling or permanent modifications.
Kit Contents and Key Facts
- RAM® Small Gas Tank Mount with Universal Action Camera Adapter: The powder-coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. This tells you the mount is designed for specific bike models, so you need to verify compatibility before buying.

RAM® Small Gas Tank Mount with Universal Action Camera Adapter - RAM® Small Gas Tank Mount with Universal Action Camera Adapter: We include the hardware you need to mount to the fill port as well. All necessary bolts and brackets are in the box; you don’t need to source additional parts.
- RAM® Small Gas Tank Mount with Universal Action Camera Adapter: Included is the mount for GoPro and Garmin style action cameras. The universal adapter fits most popular action cameras, so you can attach your camera without extra accessories.
Installation Steps
Follow these steps to install the RAM Small Gas Tank Mount on your compatible motorcycle. The process uses the supplied hardware and requires basic hand tools.
- 1. Confirm motorcycle compatibility: Check that your motorcycle’s stock gas tank is listed as compatible. The mount is designed for specific models, and using it on an unsupported tank may not fit securely.
- 2. Remove the gas cap: Take off the existing gas cap to access the fill port. Work in a well-ventilated area and ensure the tank is not full to avoid spills.
- 3. Position the aluminum base: Place the powder-coated aluminum base over the fill port opening. Align the mounting holes with the tank’s existing threaded inserts.
- 4. Secure with supplied hardware: Use the included bolts and brackets to fasten the base to the fill port. Tighten evenly by hand, then use a wrench to snug them — do not overtighten, as this could damage the tank or base.
- 5. Attach the action camera adapter: The universal action camera adapter is already attached to the base. If needed, adjust the angle before locking it in place with the thumbscrew.
- 6. Mount your camera: Clip your GoPro or Garmin-style action camera onto the adapter. Ensure it clicks into place and the camera is oriented for your desired shot.
Checkpoints Before Riding
After installation, double-check that all bolts are tight and the camera is secure. The mount should not interfere with the gas cap’s seal or your ability to refuel. Test the camera’s field of view while seated on the bike. If the angle needs adjustment, loosen the adapter’s thumbscrew, reposition, and retighten.
The supplied information does not specify torque values or a maintenance schedule. Use common sense: inspect the mount periodically for loosening due to vibration, especially after the first few rides.


