Before you mount: confirm your iPad fits the Tab-Tite cradle
The RAM-B-189-TAB3-ALA1U is built around a Tab-Tite universal clamping cradle, and the key word is universal. The cradle fits any tablet that falls within the listed dimensions, so the first step is not installation—it is measuring your iPad. RAM explicitly notes that it is important to verify your tablet's dimensions when determining the overall size.
That matters most if you are trying to mount an old iPad in a vehicle. iPad Gen 1 through Gen 4 share a similar footprint, but cases, skins, and screen protectors can change thickness. Measure the tablet as you plan to mount it, not the bare device, and compare that to the cradle's listed dimensions. If your tablet sits outside those numbers, the mount will not clamp securely no matter how carefully you install it.
One more compatibility note: the included backplate is interchangeable with various size support cups, so the mount can be adapted to numerous tablet models. If you later switch tablets, RAM states that new detachable support cups are the only components needed for purchase—you do not have to replace the whole mount.
What the RAM-B-189-TAB3-ALA1U includes
- RAM® Tab-Tite™ Dual Suction Mount for iPad Gen 1-4 - Extension Knob: Double 3.3" twist lock suction cup base, double socket arm, round base adapter, extended retention knob, and Tab-Tite universal clamping cradle. Knowing the full parts list helps you confirm nothing is missing before you start and understand which piece does what during installation.

RAM® Tab-Tite™ Dual Suction Mount for iPad Gen 1-4 - Extension Knob - RAM® Tab-Tite™ Dual Suction Mount for iPad Gen 1-4 - Extension Knob: The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed for the product. This is the single most important fit check—your iPad Gen 1–4 must fall within those listed dimensions to clamp properly.
- RAM® Tab-Tite™ Dual Suction Mount for iPad Gen 1-4 - Extension Knob: The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models. If you plan to use the mount with more than one tablet over time, the backplate system lets you adapt rather than rebuy.
Windshield installation sequence
The supplied product information describes the components but does not include a formal step-by-step procedure. The sequence below follows the logical order of the parts as listed; treat it as a practical framework rather than a manufacturer instruction sheet.
- Clean the windshield area: A suction cup needs a smooth, clean surface to hold. Wipe the target spot and let it dry before attaching the base.
- Attach the double 3.3" twist lock suction cup base: Press the cup against the glass and turn the twist lock to engage suction. Choose a spot that does not block your view of the road.
- Connect the double socket arm: The double socket arm links the suction base to the round base adapter. Leave the sockets loose enough to adjust the angle later.
- Attach the round base adapter and cradle: The round base adapter is the interface between the arm and the Tab-Tite cradle. Once connected, you can set the viewing angle.
- Load the iPad into the Tab-Tite cradle: Slide the tablet into the clamping cradle. The extended retention knob is the adjustment point for securing it—turn it to tighten the hold on the tablet.
- Tighten the arm and check the fit: Lock the socket arm at your preferred angle, then confirm the tablet is held firmly and the suction base is still secure.
Why the extension knob matters on this mount
The extended retention knob is a small part with an outsized role. On a standard Tab-Tite cradle, the retention knob can sit close to the back of the tablet, which makes it awkward to reach once the device is loaded. The extension moves that adjustment point out where your fingers can get to it without removing the iPad.
In practice, this means you can loosen, reposition, or tighten the cradle grip while the tablet stays in place. That is useful in a vehicle where you might want to switch between portrait and landscape orientation, or hand the iPad to a passenger. The extension knob setup is essentially: fit the knob to the cradle's retention point, load the tablet, and turn the knob to clamp. The supplied information does not specify a torque or a number of turns, so tighten until the tablet is held firmly without overtightening.
Fit checks before you commit to this mount
- Measure your iPad Gen 1–4 with its case on: The cradle fits tablets within the listed dimensions. A bulky case can push you outside that range, so measure the setup you actually plan to use.
- Confirm the suction surface: The 3.3" twist lock suction cup base is designed for smooth surfaces like glass. The supplied information does not describe performance on textured or curved dash surfaces, so plan around the windshield if that is your target.
- Check your viewing angle before tightening: The double socket arm allows angle adjustment, but you need to set it before the sockets are locked. Mock up the position with the tablet loaded, then tighten.
- Plan for tablet swaps: If you might move to a different tablet later, note that detachable support cups are the only additional purchase needed. The mount itself stays.
What the supplied information does not cover
The product record confirms the components, the cradle's dimension-based compatibility, and the interchangeable backplate system. It does not include a formal installation procedure, suction cup maintenance instructions, or guidance on temperature limits for the suction base. If you need those details—for example, how the suction cup performs in extreme heat or cold—check RAM's documentation directly rather than assuming.
The record also does not specify whether the mount supports charging while the tablet is cradled, or whether the cradle interferes with any particular port or button layout on iPad Gen 1–4. Those are worth checking against your specific device before relying on the mount for a long trip. What the record does make clear is the fit rule: verify your tablet's dimensions, and the rest of the installation follows from there.


