How to Secure a Tablet in a Cup Holder with RAM Tab-Tite

By RAM Mounts Google Search | Published: 2026-10-24

Category: How-to Guides

Learn to install the RAM Tab-Tite holder with RAM-A-CAN II cup mount. Step-by-step guidance for a secure, adjustable tablet setup in your vehicle.

Quick answer

Secure your tablet in a cup holder using the RAM Tab-Tite holder with the RAM-A-CAN II base. The mount combines a clamping cradle, adjustable arm, and cup holder base for a stable, portable setup.

Why the RAM-A-CAN II cup holder base works for tablets

The RAM-A-CAN II cup holder base is designed to fit most standard cup holders, with a 6-inch flex mounting feature that helps it adapt to different depths and angles. This flexibility is useful when your vehicle's cup holder is recessed or oddly shaped.

Because the base uses a composite shell with soft fins, it grips the cup holder walls without scratching or rattling. That means less vibration reaching your tablet, which is especially helpful on rough roads or off-road trails.

Adjusting the Tab-Tite cradle for your tablet size

The Tab-Tite universal clamping cradle uses soft fins that can be trimmed to fit your specific tablet. Before you start, check the fit: if the tablet sits too loosely, trim the fins slightly to create a snug hold. If it's too tight, the fins can be left as-is or replaced.

The cradle's spring-loaded arms keep the tablet secure while allowing quick removal when you need it. That balance of security and convenience is what makes this mount a popular choice for daily drivers and weekend adventurers alike.

Step-by-step installation

1. Prepare the cup holder: Clean the cup holder area and remove any debris. Insert the RAM-A-CAN II base, pressing down firmly until the soft fins grip the walls. Check that the base sits level and doesn't rock. If the base wobbles, adjust the flex feature or reposition the fins for a better grip.
2. Attach the round base adapter and arm: Screw the round base adapter onto the top of the RAM-A-CAN II base. Attach the long double socket arm to the adapter, tightening the knob just enough to hold the arm in place but still allow adjustment. Don't overtighten yet—you'll need to move the arm during the next step.
3. Mount the Tab-Tite cradle: Connect the Tab-Tite cradle to the other end of the arm. Position the cradle so it faces you at a comfortable angle, then tighten the arm knobs securely. Ensure the cradle is oriented so the tablet won't block your view of the road.
4. Insert and adjust the tablet: Slide the tablet into the Tab-Tite cradle, pressing the spring-loaded arms outward. Release to let the arms clamp down. Adjust the fins if the tablet feels loose or too tight. A common mistake is trimming the fins too much—start small and test the fit.
5. Test for stability: Give the mount a gentle shake and check for any movement. Adjust the arm angle or retighten the knobs if needed. Take a short test drive to confirm the tablet stays put. If the tablet still vibrates, consider tightening the cup holder base or using the flex feature to reduce play.

Product facts

RAM® Tab-Tite™ Holder with RAM-A-CAN™ II Cup Holder Mount - Long: The RAM Tab-Tite holder with RAM-A-CAN II cup holder mount includes a long double socket arm, round base adapter, and Tab-Tite universal clamping cradle, with a 6-inch flex mounting feature. The long arm and flex feature let you position the tablet at a comfortable viewing angle while keeping the base stable in the cup holder.
RAM® Tab-Tite™ Holder with RAM-A-CAN™ II Cup Holder Mount - Long