The fit problem risers are meant to solve
If your tablet sits in a RAM Tab-Tite or Tab-Lock holder with a hand strap, kickstand, or similar support accessory still attached, the cradle may not have enough room to seat the tablet cleanly. RAM's stand-off risers are designed for exactly this situation: they add height to the holder so the tablet has extra space for those accessories.
The risers add an additional 0.5" of space, according to the product record. That figure is the manufacturer's stated clearance, not a universal guarantee that every tablet-and-accessory combination will fit. The supplied information does not list specific tablet models or accessory thicknesses that are confirmed to work, so treat the riser as a clearance aid rather than a compatibility promise.
What the RAM 1/2" risers actually do
- RAM® 1/2" Risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ Holders: Stand-off risers provide additional height to RAM holders, accommodating extra space for tablets with support accessories including hand straps and kickstands. This is the core purpose of the part: it creates room for accessories that would otherwise crowd the cradle.

RAM® 1/2" Risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ Holders - RAM® 1/2" Risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ Holders: Adding an additional 0.5" in space, the risers are described as an accessory for RAM Tab-Tite and Tab-Lock holders. The stated clearance helps you judge whether your accessory is likely to fit, while the holder compatibility tells you where the part is intended to go.
- RAM® 1/2" Risers for RAM® Tab-Tite™ and RAM® Tab-Lock™ Holders: The included hardware allows for easy attachment to RAM Tab back plates. You do not need to source separate fasteners for the intended mounting points, based on the supplied record.
Signs a riser may be the right fix
Use these as diagnostic prompts, not as a confirmed checklist. The supplied information does not include installation instructions or a list of symptoms the risers are guaranteed to resolve.
- Your tablet has a hand strap or kickstand attached: These are the accessory types the product record specifically names as the reason for the extra space.
- The holder feels crowded around the back of the tablet: The risers add height to the holder, which is the intended way to create more room for accessories.
- You already use a RAM Tab-Tite or Tab-Lock holder: The risers are described as an accessory for those holder families and attach to RAM Tab back plates.
What the risers do not tell you
The supplied record does not include care instructions, torque values, or a step-by-step installation sequence. It also does not state a maximum accessory thickness or list which specific tablet models are confirmed to fit with the risers installed. If your setup depends on those details, the available information is not enough to confirm compatibility.
The record also does not describe whether the risers change the holder's locking behavior or weather resistance. Do not assume those properties are affected either way; the supplied evidence simply does not address them.
Riser or no riser: a simple decision
- Add the risers: Choose this when you use a hand strap or kickstand with a Tab-Tite or Tab-Lock holder and want the additional 0.5" of space the product record describes.
- Skip the risers: If your tablet sits in the holder without support accessories and you have no clearance concern, the supplied information gives no reason to add height.
- Check before you buy: If you need a confirmed fit for a specific tablet and accessory combination, the supplied record does not provide that confirmation. Verify with the manufacturer or retailer before ordering.


