Back to Blog
How-to Guides 2026-11-16 RAM Mounts Google Search 0 views

Mount a Garmin GPS 12 or 38 on Handlebars with a RAM U-Bolt

Mount a Garmin GPS 12 or 38 on Handlebars with a RAM U-Bolt

Learn how the RAM-B-149Z-GA1U handlebar U-bolt mount fits Garmin GPS 12, 12CX, 12XL, 12MAP and 38 units, and what to verify before you install it on your bars.

What the RAM-B-149Z-GA1U is built to hold

The RAM-B-149Z-GA1U is a handlebar U-bolt mount with a form-fitting cradle designed specifically for the Garmin GPS 12, 12CX, 12XL, 12MAP and 38. If you own one of those units, this kit gives you a bar-mounted solution without adapting a generic holder. The cradle is shaped for these models, so the device sits in a dedicated fit rather than a universal clamp.

The mount combines three core parts: a medium-length B-size double socket arm, a handlebar U-bolt base for rails 0.5" to 1.25" in diameter, and the Garmin-specific cradle. That arm length and socket design are part of the kit's intended adjustability, letting you position the GPS after the base is secured.

Key fit and hardware facts

  • RAM® Handlebar U-Bolt Mount for Garmin GPS 12, 12CX, 12XL, 12MAP & 38: The RAM-B-149Z-GA1U consists of a medium-length B-size double socket arm, a handlebar U-bolt base for rails 0.5" to 1.25" in diameter, and a form-fitting cradle for Garmin GPS 12, 12CX, 12XL, 12MAP & 38. These three components determine whether the mount will fit your handlebar and hold your specific GPS model.
    RAM® Handlebar U-Bolt Mount for Garmin GPS 12, 12CX, 12XL, 12MAP & 38
    RAM® Handlebar U-Bolt Mount for Garmin GPS 12, 12CX, 12XL, 12MAP & 38

Installation sequence for the handlebar U-bolt mount

The supplied product record confirms the included components and rail range but does not include a step-by-step procedure. The sequence below follows from the hardware described; use it as a practical guide, and consult any printed instructions that come with your kit for manufacturer-specific details.

  1. Confirm your handlebar diameter: Measure the bar where you plan to clamp the U-bolt. The base supports rails from 0.5" to 1.25" in diameter. If your bar falls outside that range, this mount is not the right fit.
  2. Test-fit the cradle with your Garmin: Place your GPS 12, 12CX, 12XL, 12MAP or 38 into the form-fitting cradle before mounting anything. The cradle is shaped for these models, so the device should seat directly.
  3. Position the U-bolt base on the bar: Choose a clear section of handlebar that gives you room to reach the GPS and route the device without interfering with controls. The U-bolt base clamps around the bar.
  4. Attach the double socket arm: Connect the medium-length B-size arm between the U-bolt base and the cradle. The double socket design lets you adjust the angle before final tightening.
  5. Set your viewing angle and tighten: With the GPS in the cradle, adjust the arm to a comfortable viewing position. Tighten the socket connections so the mount holds its position.

Fit checks before you commit

  • Handlebar diameter: The U-bolt base is rated for 0.5" to 1.25" rails. Measure your bar at the mounting point, not at a tapered or padded section.
  • Garmin model compatibility: This cradle is listed for GPS 12, 12CX, 12XL, 12MAP and 38. If you have a different Garmin model, the cradle may not fit; check the model number on your device.
  • Clearance around the bar: Leave enough room for the U-bolt base and the arm so the GPS does not obstruct your view or controls. The medium-length arm gives some flexibility, but the mounting location still needs to be practical.

What the supplied information does not cover

The product record does not include specific torque values, cable routing instructions, or a detailed installation procedure. It also does not confirm whether additional tools are required beyond what is in the kit. For those details, refer to the documentation included with your mount or contact the manufacturer.

This article describes the RAM-B-149Z-GA1U as supplied. If your Garmin is a different model, or your handlebar falls outside the 0.5" to 1.25" range, this particular mount is not the right choice. The absence of those details in the record is not a statement about the full product documentation.

Related Articles

Customer Service
Home
Products
Cart
Profile