RAM Flex Adhesive Double Ball Mount for TomTom Bridge Setup
By RAM Mounts Google Search | Published: 2026-10-25
Category: How-to Guides
Learn how to install the RAM Flex Adhesive Double Ball Mount for TomTom Bridge. Step-by-step guide with tips for a secure adhesive mount on your dashboard.
Quick answer
Install the RAM Flex Adhesive Double Ball Mount by cleaning your dashboard, attaching the adhesive base, and adjusting the double ball arm to hold your TomTom Bridge securely.
Why the adhesive base works for dashboards
The RAM Flex Adhesive Double Ball Mount uses a strong adhesive base designed for flat, non-porous surfaces like glass or smooth plastic dashboards. It avoids drilling or suction cups, making it a clean, permanent option for your vehicle.
One trade-off: the adhesive bond is strongest on clean surfaces. Dirt, dust, or dashboard texture can reduce adhesion, so thorough cleaning is critical. Also, once placed, repositioning is difficult without losing grip.
Installation steps
- Clean the mounting surface: Wipe the dashboard area with isopropyl alcohol and a lint-free cloth to remove oils and debris. A clean surface ensures maximum adhesion. Avoid touching the cleaned area with bare fingers.
- Peel and apply the adhesive base: Remove the protective backing from the adhesive pad and press the base firmly onto the dashboard for 30 seconds. Apply even pressure across the entire base. Any air bubbles can weaken the bond.
- Attach the double ball arm: Snap the medium arm's ball end into the base socket, then attach your TomTom Bridge cradle to the other ball end. Make sure the ball is fully seated in the socket. A partial connection may cause the mount to slip under vibration.
- Adjust the viewing angle: Loosen the tension knob on the arm, position your TomTom Bridge to your preferred angle, then retighten the knob. Do not overtighten—this can strip the plastic threads. Finger-tight is sufficient to hold the device steady.
- Let the adhesive cure: Wait 24 hours before mounting your TomTom Bridge or driving on rough roads to allow the adhesive to reach full strength. Skipping the cure time risks the base detaching during sudden stops or bumps.
Product facts
- RAM® Flex Adhesive Double Ball Mount for TomTom Bridge + More: The RAM Flex Adhesive Double Ball Mount is a complete kit with an adhesive base, double ball joint, and medium arm, rated to hold up to 2 lbs. It provides flexible positioning for your TomTom Bridge without needing screws or suction cups, ideal for dashboard mounting.
RAM® Flex Adhesive Double Ball Mount for TomTom Bridge + More
