Start with the mounting point, not the cup holder
RAM makes two cup holder mounts that look similar but attach in completely different ways. One screws onto a standard 1/4"-20 stud; the other slides into a track. Your existing hardware—not the cup you want to hold—should decide which one you buy.
This guide compares the RAM® Cup Holder with 1/4"-20 Male Thread Adapter and the RAM® Drink Cup Holder for Tracks using the supplied product records, so you can match the mount to your paddleboard, boat, kayak, or cooler without guessing.
Thread adapter vs track base at a glance
Both holders fit a variety of cup sizes and include a side slot for a handled mug. The attachment method is the real difference.
- RAM® Cup Holder with 1/4"-20 Male Thread Adapter: Attaches to the standard 1/4"-20 stud mount commonly found on stand up paddleboards. Best if your board or deck already has that threaded stud.
- RAM® Drink Cup Holder for Tracks: Attaches to the track mounting system on a boat, kayak, or cooler. Compatible with all versions of the RAM Tough-Track, with two attachment points: side for vertical tracks and bottom for horizontal tracks.
What the 1/4"-20 thread adapter version is built for
- RAM® Cup Holder with 1/4"-20 Male Thread Adapter: Designed for use with your SUP, this version attaches to the standard 1/4"-20 stud mount commonly found on stand up paddleboards. If your paddleboard already has a 1/4"-20 stud, this holder threads directly on—no track or separate base required.

RAM® Cup Holder with 1/4"-20 Male Thread Adapter - RAM® Cup Holder with 1/4"-20 Male Thread Adapter: A slot on the side accommodates your favorite cup or mug with a handle. Useful if you carry a handled mug rather than a tapered cup.
- RAM® Cup Holder with 1/4"-20 Male Thread Adapter: A drain plug at the bottom helps prevent buildup of residue, and hook slots on the side hold a variety of accessories. The drain plug matters on the water, and the hook slots add storage without a second mount.
What the track-mounted version is built for
- RAM® Drink Cup Holder for Tracks: Designed for the track mounting system on your boat, kayak, or cooler. This is the version to choose when your craft or cooler has a RAM Tough-Track rather than a threaded stud.

RAM® Drink Cup Holder for Tracks - RAM® Drink Cup Holder for Tracks: Compatible with all versions of the RAM Tough-Track, with two attachment points: on the side for vertically mounted tracks and on the bottom for horizontally mounted tracks. One holder covers both track orientations, so you can move it between setups.
- RAM® Drink Cup Holder for Tracks: A drain hole at the bottom helps prevent residue buildup, and hook slots on the side are placed for lures. The hook slots are a small but real advantage for kayak anglers who want quick lure storage.
How to attach each RAM cup holder
For the 1/4"-20 version, the supplied information confirms it attaches to the standard 1/4"-20 stud mount commonly found on stand up paddleboards. The record does not include a step-by-step tightening procedure, so follow the instructions that come with your board or stud mount rather than forcing the holder.
For the track version, the record confirms two attachment points: the side for vertically mounted tracks and the bottom for horizontally mounted tracks. That means you choose the attachment point that matches how your RAM Tough-Track is oriented, then secure the holder to the track. The supplied information does not include torque values or a full installation sequence.
Choose by your existing hardware
- You have a 1/4"-20 stud on a paddleboard: Choose the RAM® Cup Holder with 1/4"-20 Male Thread Adapter. It is designed for that exact stud.
- You have a RAM Tough-Track on a boat, kayak, or cooler: Choose the RAM® Drink Cup Holder for Tracks. It is compatible with all versions of the RAM Tough-Track.
- You have neither a stud nor a track: The supplied records do not confirm a direct attachment method for these two holders without one of those mounting points. You would need to add the matching base or track first.
- You want one holder for multiple craft: The track version's two attachment points make it easier to move between horizontal and vertical tracks, but it still requires a RAM Tough-Track on each setup.
What the records do not settle
Neither supplied record lists exact cup dimensions, load limits, or a complete installation procedure. The 1/4"-20 version's record does not describe a track option, and the track version's record does not describe a threaded stud option. If your setup falls outside a 1/4"-20 stud or a RAM Tough-Track, check the full product documentation before buying.
At catalog prices of USD 12.59 for the thread adapter version and USD 14.51 for the track version, the cost difference is small. The mounting point on your gear is the deciding factor.



