How to Install a RAM Pedestal VESA Monitor Mount in a Truck

By RAM Mounts Google Search | Published: 2026-10-23

Category: How-to Guides

Step-by-step guide to installing a RAM 7-inch pedestal VESA mount in your truck for a stable, adjustable monitor setup.

Quick Answer

To install a RAM Pedestal VESA monitor mount in your truck, secure the pedestal base to a flat surface, attach the VESA plate to your monitor, then mount the monitor onto the pedestal arm and route cables through the integrated channel.

Why a Pedestal Mount Works for Truck Cabins

A free-standing pedestal mount like the RAM 7-inch model provides a stable platform that doesn't require drilling into your truck's dashboard or console. Its 180-degree swivel base and 180-degree device tilt let you adjust the monitor for optimal viewing from the driver or passenger seat.

The built-in cable routing keeps wires organized and out of the way, which is especially important in a truck cabin where space is tight and loose cables can become a hazard.

What You'll Need

You'll need the RAM 7-inch pedestal mount (RAP-D11H-7-V100-GRY), a monitor with a 100mm VESA pattern, and basic hand tools like a screwdriver and a drill if you're bolting the base to a surface. The mount comes with all necessary hardware for most installations.

Installation Steps

Choose and Prepare the Mounting Surface: Select a flat, stable area in your truck—such as the floor between seats or a flat section of the center console. Clean the surface and, if bolting, mark drill points. A common mistake is mounting on an uneven surface, which can cause the pedestal to wobble. Ensure the surface is level and clean before proceeding.
Secure the Pedestal Base: Attach the base of the RAM 7-inch pedestal mount to the surface using the provided bolts or screws. If using a drill, pre-drill pilot holes to avoid splitting the material. Do not overtighten, as this can strip threads or crack the base. Check that the base is firmly attached and does not shift.
Attach the VESA Plate to Your Monitor: Align the 100mm VESA holes on the back of your monitor with the plate. Insert and tighten the screws evenly. A common mistake is using screws that are too long, which can damage the monitor's internal components. Use the correct screw length; stop if you feel resistance.
Mount the Monitor onto the Pedestal Arm: Slide the VESA plate onto the pedestal arm until it clicks or locks into place. Adjust the tilt and swivel to your preferred angle. Ensure the locking mechanism is fully engaged before releasing the monitor. Test the lock by gently tugging the monitor after mounting.
Route Cables Through the Pedestal: Feed your monitor's power and video cables through the cable routing channel built into the pedestal. Leave enough slack for full range of motion. A common mistake is pulling cables too tight, which can disconnect them when you tilt the monitor. Verify cables move freely when you swivel or tilt the monitor.

Product Facts

RAM® 7" Pedestal Mount with 100mm VESA & Cable Routing - Gray: The RAM 7-inch Pedestal Mount features a 180-degree swivel base and 180-degree device tilt for optimal viewing and positioning. This allows you to angle the monitor toward the driver or passenger seat without moving the entire mount, making it easy to share the screen or adjust for glare.
RAM® 7" Pedestal Mount with 100mm VESA & Cable Routing - Gray