Voltar ao blog
Comparações 2026-11-17 RAM Mounts Google Search 0 visualizações

Finger-Grip vs Belt Clip Cradle: Picking a RAM Radio Holder

Finger-Grip vs Belt Clip Cradle: Picking a RAM Radio Holder

Compare the RAM Finger-Grip glare shield clamp and the belt clip cradle drill-down mount to choose the right two-way radio holder for your setup.

Two RAM radio holders, two different mounting problems

The RAM Finger-Grip and the belt clip cradle are both radio holders, but they solve different problems. One clamps to a glare shield or similar edge; the other bolts to a flat surface. Before you compare cradle styles, decide where the mount will live. That choice narrows the field faster than any spec sheet.

The RAM-B-177-UN4 Finger-Grip kit is built around a glare shield clamp that fits surfaces up to 5/8" thick. The RAM-B-138-BC1U belt clip cradle kit uses a 2.5" round plate with the AMPS hole pattern for drill-down installation. If you have a flat panel, the belt clip cradle is the natural starting point. If you have an edge you can clamp, the Finger-Grip kit may save you from drilling.

Mounting surface decides more than the cradle

  • RAM® Finger-Grip® Universal Holder with Glare Shield Clamp Mount: The RAM-B-177-UN4 includes a glare shield clamp base, double socket arm, and universal Finger Grip cradle. This is a clamp-on system, so you need a suitable edge rather than a flat surface to bolt to.
    RAM® Finger-Grip® Universal Holder with Glare Shield Clamp Mount
    RAM® Finger-Grip® Universal Holder with Glare Shield Clamp Mount
  • RAM® Drill-Down Mount with Universal Belt Clip Cradle: The RAM-B-138-BC1U includes a universal belt clip cradle, a medium length B-size arm, and a 2.5" diameter round plate with universal AMPS hole pattern. The AMPS plate is designed for drill-down mounting, so you need a flat surface where you can drive screws.
    RAM® Drill-Down Mount with Universal Belt Clip Cradle
    RAM® Drill-Down Mount with Universal Belt Clip Cradle

How each cradle holds the radio

The Finger-Grip cradle grips the radio body with spring-loaded fingers. RAM describes it as a universal cradle, but the supplied information does not list specific radio models or grip dimensions. That means you should check your radio's width and depth against the cradle's opening before you buy, or confirm with the retailer.

The belt clip cradle is designed around the radio's own belt clip. You slide the clip into the cradle, so the radio hangs from its clip rather than being gripped by the body. This works well if your radio has a sturdy belt clip and you want quick removal. The supplied information does not specify which belt clip sizes or radio models are supported, so measure your clip and compare it to the cradle's slot if possible.

Finger-Grip vs belt clip cradle at a glance

  • Mounting method: Finger-Grip kit clamps to an edge up to 5/8" thick; belt clip cradle kit bolts to a flat surface via AMPS hole pattern.
  • Radio retention: Finger-Grip cradles the radio body; belt clip cradle holds the radio by its belt clip.
  • Adjustability: Both use a double ball and socket system for viewing angles; the Finger-Grip kit includes a double socket arm, and the belt clip kit includes a medium length B-size arm.
  • Installation effort: Finger-Grip clamp installs with nylon thumb screws and no drilling; belt clip cradle requires drilling and fastening the round plate.
  • Supplied fit details: The glare shield clamp fits surfaces up to 5/8" thick. The belt clip cradle's radio compatibility is not specified in the supplied information.

Which one fits your vehicle or aircraft

If you are mounting in an aircraft, the RAM-B-177-UN4 is explicitly described as a way to mount a compact electronic device to the glare shield. The clamp base is designed for that environment, and the double ball and socket system lets you angle the radio toward you. Just confirm that your glare shield edge is within the 5/8" thickness limit and that the clamp will not interfere with controls or visibility.

For vehicles, the belt clip cradle is more versatile because you can bolt the AMPS plate to many flat surfaces—under a dashboard, on a console, or on a custom panel. But it requires drilling, and you need enough clearance for the medium length arm. The Finger-Grip kit can clamp to a visor, a rail, or another edge, but the clamp is sized for surfaces up to 5/8" thick, so thick padded visors or irregular edges may not work.

Key specs that affect the decision

What the supplied information does not settle

Neither product record lists specific radio models, so compatibility with your exact two-way radio is not confirmed. The Finger-Grip is described as universal, but universal cradles still have size limits. The belt clip cradle depends on your radio's belt clip, and the supplied information does not state which clip styles or sizes it accepts. Before ordering, check the cradle opening dimensions or ask the seller to confirm fit for your radio.

Also, the belt clip cradle kit's medium length arm and the Finger-Grip kit's double socket arm are both described, but the exact arm length in inches is not given. If reach is critical, verify the arm length with the retailer. Finally, neither record includes care or maintenance instructions, so follow any guidance that comes with the product.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil