Setting Up a RAM Cup Holder on a Brake Reservoir
By RAM Mounts Google Search | Published: 2026-10-18
Category: Product Reviews
Learn how to install the RAM Level Cup on your motorcycle's brake reservoir, with step-by-step instructions and common mistakes to avoid.
Quick answer
Mount the RAM Level Cup to your brake reservoir using the included hardware, positioning it so the cup stays level and clear of controls. Tighten evenly and check clearance before your first ride.
Why the brake reservoir is a smart mounting spot
The brake reservoir on most motorcycles sits close to the handlebar, which puts your drink within easy reach without adding bulk to the grips. It is also a stable, vibration-resistant surface, so the cup stays put even on rough roads.
That said, the reservoir is not a universal fit. Some bikes have oddly shaped or small reservoirs, and the mount may not sit flush. If the bracket does not align cleanly, do not force it—check the included hardware and adjust the position before tightening.
Step-by-step installation
- Gather tools and parts: You will need the RAM Level Cup, the mounting bracket, and the correct Allen key or wrench for the reservoir bolts. Check the kit contents before you start. Missing a tool? Do not improvise—use the right size to avoid stripping bolts.
- Clean the reservoir surface: Wipe the brake reservoir with a clean cloth to remove dirt and grease. A clean surface ensures the bracket sits flat and does not slide during tightening. A quick wipe now prevents a loose mount later.
- Position the bracket: Place the bracket over the reservoir so the cup holder will sit level when mounted. Align the holes with the reservoir bolts, and make sure the bracket does not interfere with the brake lever or throttle. Test the lever and throttle range before tightening—clearance is critical.
- Tighten the bolts evenly: Thread the bolts by hand first, then tighten them in a crisscross pattern. Use the recommended torque if specified, and avoid over-tightening, which can crack the reservoir. If the bracket rocks, loosen and reposition rather than forcing it.
- Attach the cup holder: Click the RAM Level Cup onto the ball mount and adjust the angle so the cup sits upright. Give it a gentle tug to confirm it is locked in place. A loose click means it is not seated—push until it clicks firmly.
- Test ride and adjust: Take a short ride with an empty cup first. Check that the holder stays level, does not vibrate loose, and does not block your view or controls. Adjust the angle if needed. If the cup tilts, re-tighten the ball mount—do not ride with a wobbly holder.
Product facts
- RAM® Level Cup™ 16oz Drink Holder Brake/Clutch Reservoir Mount: The RAM Level Cup is a self-leveling, gyroscopic cup holder that keeps your beverage upright through corners. You do not have to slow down for every turn—your drink stays put, which is exactly what you want on a motorcycle.
RAM® Level Cup™ 16oz Drink Holder Brake/Clutch Reservoir Mount
