What This Mount Does
The RAM Tough-Ball Action Camera Mount with Twist-Lock Suction Cup (model RAP-B-224-A-379-252025U) is designed to hold a camcorder, digital camera, or POV camera on a smooth, non-porous surface such as glass or plastic. The 3.3" suction cup base uses a twist-lock mechanism to create a strong hold, and the double socket arm with a 1" rubber ball system gives you nearly infinite adjustment for the perfect viewing angle.
Setup Steps
Follow these steps to attach the mount to a clean surface and connect your camera.
- Choose and clean your mounting surface: The suction cup is designed for glass and non-porous plastic surfaces. Clean the area thoroughly to remove dust, grease, or moisture. For improved adhesion on non-porous plastic, you can use a RAM adhesive disk (not included).
- Attach the suction cup base: Press the 3.3" suction cup firmly onto the surface. Twist the lock mechanism clockwise to create a vacuum seal. Ensure the base is flat and the seal feels secure before proceeding.
- Connect the double socket arm and ball: The mount comes with a SHORT double socket arm and a 1" ball. Snap one end of the arm onto the ball attached to the suction cup base. The patented rubber ball and socket system allows you to adjust the angle at this joint.
- Attach your camera to the Tough-Ball: The RAM Tough-Ball has a male 1/4"-20 threaded steel stud. This standard thread fits the female thread found on most camcorders, digital cameras, and POV cameras. Screw your camera or camera housing onto the stud until snug. Do not overtighten.
- Adjust the viewing angle: The double socket arm provides adjustment points at both ends. Loosen the ball socket slightly, position your camera to the desired angle, then tighten the socket to lock it in place. The system allows for nearly infinite adjustment.
Product Details
- RAM® Tough-Ball™ Action Camera Mount with RAM® Twist-Lock™ Suction Cup: The RAP-B-224-A-379-252025U consists of a 3.3" suction cup twist lock base, SHORT double socket arm and 1" ball, connected to the RAM Tough-Ball™ with 1/4"-20 camera thread. This tells you exactly what components are in the box so you know nothing extra is needed to start mounting.
RAM® Tough-Ball™ Action Camera Mount with RAM® Twist-Lock™ Suction Cup - RAM® Tough-Ball™ Action Camera Mount with RAM® Twist-Lock™ Suction Cup: The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. You can confidently mount on car windshields, smooth plastic dashboards, or other non-porous surfaces without worrying about damage.
- RAM® Tough-Ball™ Action Camera Mount with RAM® Twist-Lock™ Suction Cup: The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras. Compatibility is broad—most action cameras and small camcorders with a standard tripod thread will work.
- RAM® Tough-Ball™ Action Camera Mount with RAM® Twist-Lock™ Suction Cup: The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. You can fine-tune the camera position in multiple axes without losing a secure hold.
What the Supplied Information Does Not Cover
The available evidence does not include instructions for mounting on curved surfaces, rough textures, or porous materials like wood or fabric. It also does not specify the maximum weight the mount can support, the recommended torque for the 1/4"-20 stud, or how the mount behaves under extreme vibration or high-speed driving. For these details, refer to the full manufacturer documentation. If you need to mount on a surface that is not glass or non-porous plastic, consider a different base, such as a RAM adhesive disk or a clamp-style mount.
