What This Mount Does
The RAM Lil Buddy Adhesive Dash Mount for Apple MagSafe (2020) is a compact adapter that lets you attach the original Apple MagSafe charger to any Snap-Link compatible RAM mount. It is designed specifically for the 2020 MagSafe charger — not the newer 2024+ version. Before you start, you need to confirm which charger you own.
Identify Your MagSafe Charger Version
Check the charging cable to determine compatibility.
- Check the cable feel: If the cable has a smooth, soft rubber casing, it is the original 2020 MagSafe charger. If the cable is braided, it is the newer 2024+ model and is not compatible with this mount.
- Confirm the model year: The mount works only with the official Apple MagSafe Charger released in 2020. The supplied information does not confirm compatibility with any third-party MagSafe chargers.
Prepare the Dash Surface
A clean, smooth surface is essential for the adhesive to hold. The mount uses a permanent adhesive pad, so placement must be final.
- Clean the area: Wipe the dashboard location with a mild cleaner or alcohol wipe to remove dust, grease, and wax. Let it dry completely.
- Choose a flat spot: The adhesive works best on a flat, non-porous surface. Avoid textured or curved areas that could reduce contact.
Attach the Mount to the Dash
Once the surface is clean and dry, you can install the mount.
- Peel the adhesive backing: Remove the protective film from the adhesive pad on the bottom of the Lil Buddy mount.
- Press firmly into place: Position the mount on the chosen spot and press down firmly for several seconds to ensure full adhesion.
- Wait before loading: For best results, allow the adhesive to cure for a few hours before attaching the charger and phone. The supplied information does not specify an exact wait time.
Insert the MagSafe Charger
The mount includes an adapter puck that holds the 2020 MagSafe charger snugly.
- Fit the charger into the adapter: Place the MagSafe charging puck into the adapter cavity. It should fit precisely without force.
- Connect to Snap-Link base: The assembled adapter can then be snapped onto any RAM Snap-Link compatible mount arm or base already installed on your dash.
Key Product Facts
- RAM® Lil Buddy™ Adhesive Dash Mount for Apple MagSafe (2020): This mount is compatible only with the original Apple MagSafe Charger released in 2020. Using a newer 2024+ MagSafe charger will not fit the adapter and may damage the mount.
RAM® Lil Buddy™ Adhesive Dash Mount for Apple MagSafe (2020) - RAM® Lil Buddy™ Adhesive Dash Mount for Apple MagSafe (2020): The kit includes the RAM Lil Buddy mount with a Snap-Link connector for dashboard mounting. No additional RAM base is needed if your vehicle already has a Snap-Link mount point.
What the Supplied Information Does Not Cover
The available evidence does not include specific instructions for removing the mount once installed, nor does it confirm compatibility with non-Apple MagSafe chargers. If you plan to move the mount later, consider that the adhesive is permanent and may not re-stick. For vehicles with textured or leather dashboards, test adhesion in an inconspicuous area first.
