Two RAM bases, one camera thread
Both RAM mounts here end in the same 1/4"-20 camera interface, so the real decision is where the base attaches to your motorcycle. The RAM-B-342-366U fork stem mount drops into the center of the bike; the RAM-B-149Z-C1U handlebar U-bolt mount clamps around a rail. Neither choice is universally better — it depends on the bore or rail your bike actually has and where you want the camera to sit.
This comparison sticks to what the supplied product records confirm. Where a detail is not stated, treat it as a question to verify on your bike rather than a missing feature.
Fork stem vs handlebar U-bolt at a glance
- Mounting location: Fork stem base fits into the cylindrical bore wall of the fork stem, centering the device on the bike. U-bolt base clamps around a handlebar or rail.
- Fit range: Fork stem works with stems measuring 12–38 mm (0.5"–1.49"). U-bolt hardware accommodates rails from 0.50" to 1.25" in diameter; the included composite rail adapter can narrow the rail to a minimum width of 0.5".
- Camera connection: Both use a 1/4"-20 thread. Fork stem: round plate with 1/4"-20 camera thread. U-bolt: male 1/4" long, 1/4"-20 thread centered on a 2.5" diameter plate.
- Adjustment: Fork stem uses a double socket arm and 1" rubber ball. U-bolt uses a RAM 1" diameter rubber ball and socket with adjustment points at both ends of the double socket arm.
- Hardware notes: U-bolt base is zinc coated and includes black cover caps for exposed u-bolt ends. Fork stem record does not list cover caps.
Fork stem mount: what the record confirms
- RAM® Motorcycle Fork Stem Mount with 1/4"-20 Action Camera Adapter: The RAM-B-342-366U consists of a fork stem base, double socket arm and 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. This is the full camera-side interface: a standard 1/4"-20 thread on a round plate, so your camera's female thread is the compatibility check.

RAM® Motorcycle Fork Stem Mount with 1/4"-20 Action Camera Adapter - RAM® Motorcycle Fork Stem Mount with 1/4"-20 Action Camera Adapter: This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12–38 mm (0.5"–1.49"). Measure your fork stem bore against this range before ordering; outside it, the base is the wrong fit.
- RAM® Motorcycle Fork Stem Mount with 1/4"-20 Action Camera Adapter: The RAM Motorcycle Fork Stem Base is described as one of the cleanest and most popular solutions for mounting your device cleanly on the center of your bike. If you want the camera centered rather than offset on a bar, this base is the one designed for that position.
Handlebar U-bolt mount: what the record confirms
- RAM® Handlebar U-Bolt Double Ball Mount 1/4"-20 Threaded Stud - Medium: The RAM-B-149Z-C1U consists of a zinc coated u-bolt base, standard size double socket arm and universal 1/4"-20 thread, centered on a 2.5" diameter plate. The 2.5" plate gives you a broad camera contact surface, and the 1/4"-20 thread matches the standard female thread found at the bottom of most still and video cameras.

RAM® Handlebar U-Bolt Double Ball Mount 1/4"-20 Threaded Stud - Medium - RAM® Handlebar U-Bolt Double Ball Mount 1/4"-20 Threaded Stud - Medium: Included hardware will accommodate rails from 0.50" to 1.25" in diameter, and the included composite rail adapter can narrow the rail to a minimum width of 0.5". The base includes black cover caps to be placed over the exposed ends of the u-bolt. Check your handlebar or rail diameter against 0.50"–1.25"; the adapter and cover caps are part of the package, not extras.
- RAM® Handlebar U-Bolt Double Ball Mount 1/4"-20 Threaded Stud - Medium: The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Two adjustment points help you aim the camera after clamping to a bar that may not be level or straight.
How to choose for your bike
- Start with the attachment point, not the camera: Measure the fork stem bore (12–38 mm / 0.5"–1.49") or the handlebar/rail diameter (0.50"–1.25"). Whichever measurement your bike matches is the base that can physically fit.
- Pick the fork stem if you want a centered view: The fork stem base is designed to mount cleanly on the center of the bike. It suits a sport bike or any machine with an open stem bore in the stated range.
- Pick the U-bolt if your bar is in range and you want clamp-on simplicity: The U-bolt wraps a rail from 0.50" to 1.25" and adds cover caps over the exposed bolt ends. It does not require a fork stem bore.
- Confirm the camera side on both: Both mounts use 1/4"-20. The U-bolt record specifically notes this thread connects to the standard female thread found at the bottom of most still and video cameras. Check your own camera's thread before ordering.
What the supplied records do not settle
Neither record supplies installation steps, torque values, or a list of specific camera models. The fork stem record does not state a maximum camera weight, and the U-bolt record does not state whether the 2.5" plate is compatible with every action camera cage or adapter. Those are not confirmed by the supplied information, so verify them against your camera and your bike's service information before riding.
The fork stem record also does not mention cover caps, and the U-bolt record does not mention a fork stem bore range. Do not assume one mount's hardware or fit notes carry over to the other just because both share the 1/4"-20 thread.



